What mount does Holosun use?

The Holosun red dot uses Aimpoint micro pattern mounts.

Does Holosun use RMR Mount?

Yes, it can use the Trijicon RMR mounting plate included with the IWI Masada.

Do Aimpoint mounts work with Holosun?

With which weapons are the HOLOSUN® red dot sights compatible? HOLOSUN® red dot sights are supplied with Picatinny mounts (compatible with the Aimpoint® Micro Footprint).

Does Holosun 507c fit RMR cut?

Does Holosun 507c Fit RMR Cut? The Holosoun 507c has the same footprint as the RMR, therefore it will fit any slide manufactured for the Trijon RMR.

Will Holosun 507C fit HK vp9?

No, it will not. The Holosun 407C, 507C and 508T models will fit an RMR mounting pattern. So you will want one of these models instead of one of the "K" models.

How Do You Mount Optics On An AK-47?

Does Holosun 507K fit RMR cut?

THE HOLOSUN 507K IS NOT COMPATIBLE WITH TRIJICON RMR CUT FOOTPRINTS, (that is the Holosun 507c… It's confusing, we know.

Will Holosun 508T fit RMR cut?

Yes, it does.

Does Holosun 509T fit RMR cut?

No. It comes with a Glock MOS adapter plate, which does not fit a RMR cut. I am waiting for Holosun to release a RMR to 509T plate that, as of today 10/14/20, they have listed as “coming soon” on their website.

What mount is the Holosun 507K?

Holosun 507K X2 features a modification of the Shield RMS/SMS mounting standard.

What is RMR Mount?

The AD-RMR-TL Mount was designed to provide a low, absolute co-witness or lower 1/3rd co-witness mounting solution for the Trijicon RMR, SRO and similar optics that share the same footprint. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize.

What Holosun will fit RMR cut?

Yes, the Holosun 407/507/508 (NON-K MODELS) share the Trijicon RMR mounting pattern and will mount to an RMR cut slide or mount.

Does Holosun 407k fit RMR?

Well done as usual! The RMR to 407k adapter plate worked great. The fitment was perfect, nice an tight, Tight fit to slide, (the slide is a Alpha Shooting Sports, Conqueror), 407k fitment was perfect and the sides of the plate fit flush with the sides of the slide.

Is Holosun 407k RMR?

The Sig Romeo Zero has the same pattern as the RMSc but the Holosun 407k and 507k will not work with an RMSc cut. The 407k doesn't have the holes for the 2 additional mounting post that the RMSc cut consists of. Holosun makes adapters for this optic to RMR and MOS, which eliminates those as the mounting pattern.

What footprint is the Holosun 508T?

In the end, mounting your 508t is going to be very easy because Holosun chose to go with the Trijicon RMR footprint in this sight.

What is the difference between Holosun 507C and 407C?

The differences are that the 507c has 3 reticle options for you to cycle through, whereas the 407c only has the 2 MOA dot… In addition to that, the 507c is around 60 to 70 bucks more expensive than the 407c.

Does vortex venom fit RMR?

Vortex Viper / Venom Red Dot Sight Mount for RMR Cut Zev Slides (fits Burris FastFire and Docter)

What pattern does Holosun 507K use?

The 507k model features a switchable reticle (2 MOA dot & 2 MOA dot surrounded by a 32 MOA circle & circle only). This combination is great if you plan on shooting both at short distances (circle) and medium distances where some more precision is required (2 MOA dot).

Will the Holosun 507K fit the Hellcat?

The HEX Wasp is a robust little red dot with an RMSc footprint that will fit directly onto the Hellcat's optic cut. The Holosun 507k is the best miniature subcompact pistol optic in terms of reliability and durability, but it will require a mounting plate (or modification to your slide) to mount it on the Hellcat.

Will the Holosun 507K fit the Kimber R7?

Perfect fit for my Kimber Mako R7. I mounted my Holosun HS507K X2 with the provided screws and it went on great. Thanks for the precise work!

What footprint is the Holosun 407k?

Holosun 407k is a red dot sight of the Reflex series. The letter 'K' indicates the red dot sight's unique, miniature shape which makes it ideal for pistol use. It has a modification of the Shield RMS footprint instead of the Trijicon RMR footprint found on Holosun 407C moa dot, 507C moa dot, and 508T dot.

Where is Holosun optics made?

They are based in Texas. Their products are made in China. Some of their products are china. PA also has optics manufactured in the Philippines and Japan.

What footprint is Delta Point Pro?

Four Major Footprints

Footprint or slide cut B fits the Shield RMSc, the SIG Sauer Romeo 0, and the Holosun 507KX2. Footprint C works for the Leupold Delta Pro, SIG Sauer Romeo 1, and the Crimson Trace CTS-1250.